DIN Rail Mounting Bracket 1-Port for RJ45/Fiber Keystone

Not every installation calls for multiple network ports in the cabinet. For that single connection, such as a PLC, camera or service port, this metal mounting bracket places one keystone module on the 35 mm DIN rail at an installed width of 23 mm.

A keystone module is a connection module in a fixed snap-in format, such as an RJ45 jack for network cabling or an adapter for fiber optics. The module clicks into the bracket without tools.

Benefits

• One keystone opening of 19 x 14.8 mm following the fixed snap-in format.
• Installed width of 23 mm, leaving rail space for breakers and other components.
• Metal housing for mounting in switch cabinets, distribution boards and rail enclosures.
• Clips onto any standard 35 mm DIN rail (top-hat rail).
• Module stays accessible at the front and can be replaced separately.

Applications

• A single network connection for a PLC, IP camera or sensor in the switch cabinet.
• Service port in a distribution board, letting an engineer connect directly during maintenance.
• Fiber or copper connection point in narrow rail enclosures with little free rail space.
• Individual connection points spread across several cabinets within the same installation.

Technical features

The bracket is made of metal, with one 19 x 14.8 mm keystone opening and a width of 23 mm on the rail. Mounting follows the 35 mm DIN rail dimension, also known as top-hat rail. The keystone module is placed from the front and swapped without taking the bracket off the rail, so a connection point changes from copper to fiber or back at any time. In practice you combine the bracket with keystones from the Zybrnet range.

Need a single connection point on the DIN rail? At Grayle you combine this bracket with a keystone module and installation cable of your choice, and the connection point is ready for use.